BOCA RESEARCH, INC.

IDE200

  Data bus:                  16-bit ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE(AT) drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB
                             drives

[Image]

                                CONNECTIONS

                    Function                             Location

  40-pin primary IDE(AT) connector                          J1

  34-pin cable connector - floppy drive                     J2

  10-pin serial port 2 - internal                           J3

  9-pin serial port 1 - external, 10-pin                    J4
  serial port 1 internal

  4-pin connector - drive active LED                        J5

  25-pin parallel port - external                           J9

                        USER CONFIGURABLE SETTINGS

             Function                   Location            Setting

  »   IDE(AT) interface is                 J6A         Pins 4 & 5 closed
      primary

      IDE(AT) interface is                 J6A         Pins 5 & 6 closed
      secondary

  »   Parallel port IRQ7 select            J6B         Pins 1 & 2 closed

      Parallel port IRQ5 select            J6B         Pins 2 & 3 closed

  »   IDE(AT) IRQ 14 select                J6B         Pins 4 & 5 closed

      IDE(AT) IRQ 15 select                J6B         Pins 5 & 6 closed

  »   Serial port 1 IRQ4 select            J6C         Pins 1 & 2 closed

      Serial port 1 IRQ7 select            J6C         Pins 2 & 3 closed

  »   Serial port 2 IRQ3 select            J6C         Pins 4 & 5 closed

      Serial port 2 IRQ5 select            J6C         Pins 5 & 6 closed

                  USER CONFIGURABLE SETTINGS (CONTINUED)

             Function                   Location            Setting

  »   Serial port 1 enabled                J8A         Pins 1 & 2 closed

      Serial port 1 disabled               J8A         Pins 2 & 3 closed

  »   Serial port 2 enabled                J8A         Pins 4 & 5 closed

      Serial port 2 disabled               J8A         Pins 5 & 6 closed

  »   Serial port 1 is COM1                J8B         Pins 1 & 2 closed

      Serial port 1 is COM3                J8B         Pins 2 & 3 closed

  »   Serial port 2 is COM2                J8B         Pins 4 & 5 closed

      Serial port 2 is COM4                J8B         Pins 5 & 6 closed

  »   Parallel port interface              J8C         Pins 1 & 2 closed
      enabled

      Parallel port interface              J8C         Pins 2 & 3 closed
      disabled

  »   IDE(AT) interface enabled            J8C         Pins 4 & 5 closed

      IDE(AT) interface disabled           J8C         Pins 5 & 6 closed

  »   Parallel port address is             J8D         Pins 1 & 2 closed
      378h

      Parallel port address is             J8D         Pins 2 & 3 closed
      278h

  »   Floppy drive interface               J8D         Pins 4 & 5 closed
      enabled

      Floppy drive interface               J8D         Pins 5 & 6 closed
      disabled